MENU CONTACT 
   Redirecting... ...to our OLD website!


We're still in the process of converting the site to the new format.

Apologies for the inconvenience and thank you for your understanding.

-Matt, Admin

5

Ok - go now to OLD site

No thanks - stay on NEW site


Technical Motorbike Help

Hayabusa front brake bleed

Hayabusa front brake bleed - Forums [Biker Match] Hayabusa front brake bleed - Forums [Biker Match]
Home / Search Forums / Technical Motorbike Help /

Hayabusa front brake bleed

 Posts: 4       Pages: 1/1

Post Reply
Hi have just fitted brand new nisen calipers to my 2004 busy. Have bled the lines loads of times and still the lever is not as firm as I would like.any advice would be appreciated cheers busadave
davebusa1300r @ 07/08/2015 13:52  



pull the lever back to the bar until it feels like you are giving it a good squeeze then put a cable tie etc around the lever and handle bar grip to hold the pressure on the lever and leave it like this over night, then cut the cable tie off and try the lever.
this sometimes forces the last bit of air out of the system.
mikedabike @ 07/08/2015 15:10  

Hi mike that worked a treat mate.i cannot believe the change in my brakes after a good bleed and some decent calipers.you would think that a bike which is capable of 200 mph should have brembos fitted the gen 2 bikes now have.anyway mike great tip
davebusa1300r @ 08/08/2015 15:58  

I always use a vac bleeder.....takes minutes.
rossoandy21 @ 13/10/2015 10:26  

 Posts: 4       Pages: 1/1

Back to top
Facebook Twitter Google Pinterest Text Email