whilst stationary on the cafe car park the other day my speedometer went from 0 to 160,and every where else in between then stopped working. Is it the sensor on the wheel or something else? Bike is my FZS600 FAZER, 2000 plate.
Have a look in he workshop manual. Yamaha always used the speedo or rev counter as a diagnostic fault code reader. Depending on what it dose and the numbers it reads would be the fault its displaying. If its doing this of course.
Yes. Sensor should be a hall effect one so as the pick up spins past the sensor it should register a small voltage. Would be easer with an osiliscope but it can be done with a multimeter set to DC.
![electronic speedo - Forums [Biker Match]](/images/backgrounds/strips/8mobileLQ.jpg)
![electronic speedo - Forums [Biker Match]](/images/backgrounds/strips/8desktopLQ.jpg)
